SparkFun Qwiic Thermocouple Amplifier - MCP9600 (Screw Terminals) Category_Display & LED/TFT Display 6uA/MHz (operates less than 5mW

6uA/MHz (operates less than 5mW at full operation)

The USB-OPTO-RLY88 operates with an easy to use command set as described in the table below

This code is available in the [GitHub repo](https://github

The shield now comes with all the components soldered on and tested but does not have headers installed

and a shorting block

SparkFun Qwiic Thermocouple Amplifier - MCP9600 (Screw Terminals) Category_Display & LED/TFT Display 6uA/MHz (operates less than 5mWThe MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junction) and one for the chip itself (the cold junction). As a result, the MCP9600 can read both the ambient temperature and the temperature of whatever you\'re trying to measure! The MCP9600 can do both with a resolution of 0. 0625C, and an