Stepper Motor Mount with Hardware - NEMA-17 Sized SF_Environment com/assets/learn_tutorials/1/2/0/6/SparkFun_MicroMod_Interface_v1

com/assets/learn_tutorials/1/2/0/6/SparkFun_MicroMod_Interface_v1

This allows you to make solderless connections between your development board and the SHT31-D or to chain them with a wide range of other sensors and accessories using a compatible cable

com/sparkfun/Si4703_FM_Tuner_Evaluation_Board/tree/V_H1

Project 2 Add the function of sending grain

The M2S18v18 can be distinguished from other types of M2S shields by its smaller discrete MOSFETs and the number 150 on top of the tall silver electrolytic capacitors

Stepper Motor Mount with Hardware - NEMA-17 Sized SF_Environment com/assets/learn_tutorials/1/2/0/6/SparkFun_MicroMod_Interface_v1You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one here! This mount will fit any NEMA 17 motor (with 31mm hole spacing) with four screws. There are two 30mm long slots, 30mm apart so you can easily attach it. Made of steel with welded 90 degree support triangles, its got a solid construction Comes with one mount and a bag of hardware for attachment: 4