McMaster 5300A33 Locking Changeable-Tip Retaining Ring Plier for External Rings That Fit 3.5"-6.5" OD, Plain Grip M1R 65 g/L Chemical Base Oxime

65 g/L Chemical Base Oxime Silicone Tensile Strength 348 psi Full Cure Time 1 day Cure Type Room Temperature Resistance Properties Oil Resistant Sensor Safe No Specific Sealing Application Flexible Assemblies Working Time 30 min Hardness Shore A75 Non-Hardening Yes For Material Type Metal

1/4 in Hex

Minimum Single Wire Size 14 AWG

Minimum Diameter: 3/8 in

110 Tip Style Hex Shank Shape Round Nut Driver Shank Style Solid Round Nut Driver Handle Design Fluted Magnetic/Nonmagnetic Nonmagnetic Nut Holding No Nut Driver Handle Color Multicolor Insulated No Nut Driver Handle Material Acetate Screwdriver and Nut Driver Grouping Nut Driver Sets Tether Capable Tether Capable Item Solid Round Shank Nut Driver Set Nut Driver Shank Material Alloy Steel Handle Material Plastic Handle Type Fluted ESD Safe No Tether Style Tether Capable Nonsparking No Container Type None Ratcheting No Corrosion Resistant Yes Grip Style Fluted Handle Color Multi-Color Magnetized Tip No Handle Shape Straight Tether Ready No Non-Sparking No Fastener Holding No Non-Magnetic No Shank Material Alloy Steel Replaceable Shank No Bolt Clearance 25 mm

McMaster 5300A33 Locking Changeable-Tip Retaining Ring Plier for External Rings That Fit 3.5"-6.5" OD, Plain Grip M1R 65 g/L Chemical Base OximeThe handle can be locked in place to hold rings open or closed for easier installation and removal. Change tips to use a different size or angle (installation tool is not included). 9 1 2" to 19" long pliers require a #2 slotted screwdriver. 29" long pliers require a 5 32" hex key. Pliers for external retaining rings are used to install and remove rings around a shaft. For Rings that Fit OD 3 1 2" 6 1 2" (89 mm 165 mm) For Retaining Ring Style